To use this anti-corrosion primer effectively, follow these instructions: 1. Store the canister at room temperature (between 5°C and 30°C). 2. Ensure that the surface to be treated is dry, clean, and free of grease. 3. Remove loose old lacquer and rust, and sand the surface smooth. 4. Shake the canister for approximately two minutes. 5. Spray a sample on the surface to be treated from a distance of 20 cm. 6. Apply the primer in several layers on the surface, shaking the canister between layers. 7. After use, clean the valve from any remaining primer. Note that the actual drying time may vary depending on the environmental conditions in which the spray is used. Following these instructions will help achieve optimal results when using the anti-corrosion primer.
Related keyword: Usage Instructions
To use this anti-corrosion primer effectively, follow these instructions: 1. Store the canister at room temperature (between 5°C and 30°C). 2. Ensure that the surface to be treated is dry, clean, and free of grease. 3. Remove loose old lacquer and rust, and sand the surface smooth. 4. Shake the canister for approximately two minutes. 5. Spray a sample on the surface to be treated from a distance of 20 cm. 6. Apply the primer in several layers on the surface, shaking the canister between layers. 7. After use, clean the valve from any remaining primer. Note that the actual drying time may vary depending on the environmental conditions in which the spray is used. Following these instructions will help achieve optimal results when using the anti-corrosion primer.
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.